Minelab Gold Monster 1000

The GOLD MONSTER 1000 turns beginners into experts with fully automatic operation in an easy-to-use, high performance detector.

Gold monster 1000 is a revolutionary new device to find the smallest gold nuggets underground easily and effectively also with ease of use.

So, it is designed to ease the process of gold ore detection.

However, because of its new features and modern ergonomic design, it is a good companion for any prospector.

minelab 1000 gold monster price is a crucial consideration for both hobbyists and professionals in the gold detecting community. This device boasts cutting-edge technology enabling precise and efficient gold detection.

FULLY AUTOMATIC OPERATION

Automatic Noise Cancel
Auto Ground Balance
Automatic Sensitivity

45 KHZ VLF & 24-BIT SIGNAL PROCESSOR

This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

GOLD MONSTER 1000 CONTROL BOX

GOLD MONSTER Control box mounts to GOLD MONSTER collapsible shafts or an alternative non-metallic shaft using the shafts clamps.

EASY-TO-USE CONTROLS

Gold Chance Indicator
Detect Modes: Gold (Iron Reject) and Deep All-Metal
Sensitivity Options: Manual Sensitivity, Auto, Auto+
Adjustable Volume: 6 volume levels

IMPROVED DISCRIMINATION

The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery.

ADAPTABLE FORM

Wide ground coverage
Confined space detecting
Universal shaft adaptability

WATERPROOF COIL

Waterproof coil (to 1 m / 3 ft) and Rain proof control box.

GOLD MONSTER 1000 TECHNOLOGIES

VLF

VLF (Very Low Frequency) is a conventional single frequency sine wave continuous transmission technology. This is the traditional type of technology used in most basic metal detectors. Single frequency sine wave detectors create an electro-magnetic field, which is transmitted into the ground in a continuous wave. While the basic way that the signal is sent out and received back has not changed, the receive signal processing has improved enormously. This has proven to be a reliable and easy to use technology for finding gold.

GOLD MONSTER 1000 Outperforms All Other Single Frequency VLF Gold Detectors!

Minelab Gold Monster 1000 performance graph

Detector sensitivity comparisons are representative only. Actual performance will depend upon nugget size, detector settings and ground conditions.

Up until now, there has always been a compromise between frequency and sensitivity when optimizing detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.

When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

Automatic Noise Cancel • Digital Electronics • Auto Ground Balance • Faster Processor • Automatic Sensitivity

Easy-to-Use Controls

Minelab Gold Monster 1000 control panel

GOLD MONSTER 1000 TECH SPECS

Key Technology:

Ultra-wide dynamic range 45kHz VLF

Detect Modes:

Gold (Iron reject), Deep All-Metal

Discrimination:

Gold Chance Indicator (high/low)

Ground Balance:

Automatic (Easy-Trak)

Noise Cancel:

Automatic (On start-up)

Sensitivity Adjust:

Manual (1–10), Auto (11), Auto+ (12)

Volume Adjust:

Manual 1–6

Visual Display:

Monochrome LCD

Detector Length:

1382mm–944mm (54.4"–37.2")

Detector Weight (with10" × 6" coil):

1.33kg (2.94lbs) (excluding battery)

Audio Output:

Internal speaker or headphones 3.5mm (1/8")

Standard Coil:

GM 05 (5" Double‑D)

Waterproof/Splashproof:

Coils waterproof to 1m (3'), Control box rain/splash-proof

Battery options:

Li-Ion (included), 8 × AA Batteries (not included)

Warranty:

2 years control box & coil

Accessory coil:

GM 10 (10" x 6" Double-D)

Features:

2 Year Limited Warranty
Universal Shaft Adapter
Auto Tracking Ground Balance
Highly Adaptable Performance
Two Detect Modes : Gold & Deep All-Metal
Easy Quick Start, Fully Automatic Operation
Extra Sensitive Ultra-Wide Dynamic Range 45kHz VLF
Gold Chance Indicator : Identify your Target Before you Dig
Waterproof / Splashproof : Coils Waterproof to 1m (3'), Control Box Rain / Splash-Proof