Lorenz Deepmax X5-X6
The Lorenz Deepmax X5/X6 series detectors are some of the newest developments in the field of Pulse GBS metal detectors. It is probably one of the most sensitive and stable metal detecting devices of its kind presently available. The Lorenz Deepmax X5/X6 is the result of many years of research and development. A lot of efforts have been put into making this new product and especially in the new improved metal classifications and automatic ground balancing facilities offered with the Lorenz Deepmax X5/X6 series.
The Pulse GBS (Pulse Ground Balancing System) is specialy suitable for searching at depth. The performance of this electronic device is almost unaffected by salt water, most types of mineralised grounds or temperature changes. Specially designed electronics cancel out signals from the ground. The Lorenz Deepmax X5/X6 is therefore a reliable tool to locate metal objects at great depths even under the worst environmental conditions. A new improved circuit design suppresses interference from power lines and a power pulse technique produces very accurate signals to obtain very high detection depths.

The Lorenz Deepmax X5/X6 is a high quality specialist Detector and it is designed to be used with both, small or large coils. Large coils offer extreme depth capabilities for big metal objects because of the strong and deep going magnetic field produced. Small coils are preferably used while searching for small objects like single coins or gold nuggets.This model offers a great range on non-ferrous metal objects in general. A very simple operation is guaranteed by a specially developed LC Display and a minimum amount of controls. At the same time this detector model offers a number of features which are new for a pulse metal detector. Quality electronics and very special designed electronic - circuitry produce benefits in terms of easy of use as well as sensitivity.
The Lorenz Deepmax X5/X6 gives a visual indication on the LC Display for every metal being located. This time delay reading producing a number between 000 and 099 helps to classify metal objects. The target classification circuitry is only in some cases affected by the size of a metal object and therefore identifies small coins as well as large pieces of metal. The Lorenz Deepmax X5/X6 also offers a sophisticated and refined ferrous / non- ferrous target analysis which works more stable on difficult soils in conjunction with the 26cm or 35cm double D search coil. The Detector also emits an audible sound by way of either a speaker or headphones.Detection depths achieved (in air tests) are almost the same in many types of soils and therefore considerably higher than those possible with standard pulse induction or sinewave VLF - TR Detectors.
The Lorenz Deepmax is a high quality specialist detector and it is designed to be used with both, smaller or large coils. Large coils offer extreme depth capabilities for big metal objects because of the strong and deep going magnetic field produced. Small coils are preferably used while searching for small objects like single coins or gold nuggets.
This model offers a great range on non-ferrous metal objects in general. Very simple operation is guaranteed by a minimum amount of controls of which only one reset button will be necessary to operate during use. At the same time this detector model offers a number of features which are new for Pulse Metal Detectors. Quality electronics and very special designed electronic circuitry produce benefits in terms of being easy-to-use as well as having extreme sensitivity.
The Lorenz Deepmax was developed for anyone wanting to locate deep hidden treasure as well as professional search and locating applications. A variety of search coils can be connected to this metal detector. Large areas can be detect effectively especially with frame coils. Salt water, most types of ground or temperature changes don't affect the detection range of the Lorenz Deepmax.
Factory Included:
Plastic carrying case with foam padding
Electronics control box
Telescopic pole
Stereo Headphones
35 cm DD-searchcoil
1 x 1m frame coil
Adjustable shoulder and belt strap with chargeable 12V battery pack
Charger wide-ranging AC-input (100 - 240 V)
AC-plug (Euro / USA / UK / Australia)
Operating manual (English)
USB Stick for firmware-updates
CE & FCC certificated
Specifications:
- Highly sensitive to all kinds of metal
- Stable operation on mineralised ground or salt water
- Reliable/simple operation
- Exact pinpointing with large coils
- Very easy and effective detection of large areas
- Rugged, refined mechanical construction
- Waterproof Search Coils: 14" (35cm) DD Coil and 40" x 40" (1 x 1M) Frame Coil
- Automatic adaptation of different coil sizes to the electronics
- Small unwanted metal objects can either be identified or eliminated
- Fast audio response speed with voltage controlled oscillator (VCO)
- Logarithmic audio response and intensity bar graph reading for easy pinpointing
- Battery check with audio alarm tone
- Calibrated static (non-motion) target classification with visual time delay reading
- Improved ferrous/non-ferrous identification which is less affected by the ground
- Precisely adjustable audio-threshold
- Stable static response (acoustical and visual)
- Interchangeable rechargeable Battery pack
- Charge electronics with interchangeable AC-plug for world-wide operation
- Frequency control for interference elimination
- Automatic push button retuning facility
- Different Delay and Sensitivity settings to eliminate small objects or for easy pinpointing
- Extreme detection depths for very large metal objects
- Optimal performance for the detection of small objects like coins or other non-ferrous objects as well as for bigger objects buried deep.
- Single or dual induction balanced or differential coil designs can be used.
- Multi sensor detection (MST) with several searchcoils working at the same time without interfering each other.
- Easy to use Built-in Data Logger function (built in the Deepmax X6 only) Works with additional Hard- and Software to generate six 2D image and six 3D surface maps from the scans being taken.
- Additional GPS-Module
- New GPS based meter, Track, Field and compass
- New search system with new LC Display simultaneously displaying signal strength bar graph, time delay reading, ferrous/non-ferrous icons, battery condition and all the mode settings
- More stable ground balancing functions for less interference in urban areas
- Improved AUTO function which gives with most targets only one indication instead of two when ground balancing system is selected to make the unit even more stable.
- Completely New GROUND balancing systems with DD coils gives additional depth to small and large non-ferrous metal objects.
- Automatic false finding target identification.
Firmware V1210 for DEEPMAX X5 & X6
Firmware V1018 for DEEPMAX X5 & X6
























